Please make sure the player software has been installation in the computer before
connecting.
Remark: To make sure the video plays smoothly, we suggest you to copy the files to
your computer then play back it.
Switch off
Press the power on/off button
for few seconds
, the red will flash 3 times, then the power
will turn off. (The device can be switched off under any mode.)
Attention:
the file will be saved automatically before the power turns off.
Setting time
The recording date and time can be displayed on the video and photo. When using the
device for the first time, you can set the time of video as follows:
1. Plug the camera into the computer via USB cable
2. Insert the CD and open the file named “Time.txt”
3. Change to desired date and time, format as 2012.07.13 14: 56:12 Y
4. Save file to the device directory
5. Close the window and turn off the product. The camera should then have the correct
date and time next time a file is recorded.
Note: In order for the time and date to work correctly, the date must be entered as
YYYY.MM.DD and the time must be entered as HH:MM:SS.
Attention
1) When taking video continually, the system will automatically generate a new video
file after each operation.
2) If the device cannot be turned on, please check whether the power is low. While the
device in the low power, the red light flashes 10 times. Then, the file will be saved
automatically and the device turns off.
3) In order to ensure the sound effect better, please use the MIC cover while recording.