12
Front Panel Menu Operation
1. Reports Menu
Use the Reports Menu to print the Alarm Log, Event Log, Current Levels, Verified Counts, Maintenance report,
Current PWs, Obscuration, CO Maintenance report, and Battery Voltage. You can view on screen, or print directly to
a printer connected to the panel, or to your laptop computer.
To enter the Reports Menu, you must be in the Command Menu. To enter the Command Menu, press
when
the display is in normal mode.
The following subsections provide instructions on using each Reports Menu option.
Note:
To print a report to a printer or to a laptop (using HyperTerminal), the printer output
must be enabled via the Configurator.
Step 1: Select the Reports Menu
1. Use
and
to
scroll
the cursor to “Reports”.
2. Press
to select the Reports Menu.
Step 2: Enter your passcode (if required)
Enter your passcode.
See page 10 for instructions on
entering passcodes.
Step 3: Select the option you would like to view
1. Use
and
to scroll the cursor through the
menu.
2. Press
to select an option.
3. Press
to exit and return to the Reports Menu.
Repeat to exit to the Command Menu.
- Command Menu-
1 Reports
2 Bypass
3 Walktest
4. Day/night mode
5. Set time
6. Clear Event Log
7. Clear Verif Count
8. Network Restart
9. Config Info
10. Choose Config
^
Enter passcode for
level 1 or higher:
^
- Reports Menu-
1 Alarm Log
2 Event Log
3 Current
4. Verif. Count
5. Maint Report
6. Current PWs
7. Obscuration
8. CO Maint Report
9. Battery Voltage
Содержание MMX-2003-12NDS
Страница 1: ...Intelligent Fire Alarm Network User Guide MMX TM LT 893SEC Rev 1 May 2017...
Страница 2: ......
