3)
Press the Channel Select Button “CH” on the receiver until the channel indicator matches to the
channel on the corresponding camera frequency. The monitor/TV will display camera image.
4)
Adjust the brightness, contrast and color of the monitor/TV to perfection.
Note
: The receiver can support up to 2 cameras working at the same time. You are allowed to set
the
Mode Control
as described below. The
Mode Control
has the precedence over other buttons.
Manual mode
: Slide
Mode Control
switch to
M
to enter
Manual
mode. In this mode,
the receiver channel won’t change until you press the
Channel Select Button “CH”.
Note:
To manually toggle between channels, it requires two active.
Tip:
Channel-Scan function can also be activated by pressing and holding the Channel
Select Button
"CH"
for more than 5 seconds in Manual mode. Press the
Channel Select Button
again to deactivate
Channel-Scan function.
Channel Scan mode:
Slide
Mode Control
switch to
L
to enter channel scan mode.
In this mode, all the available channels will display one by one looping in turn every
5 seconds.
Note:
Press the
Channel Select Button "CH"
at the channel scan mode, the current channel will immediately
advanced to the channel. Slide the
Mode Control
switch to
M
to disable the scan mode.