SecurityMan OutdoorWatch, Руководство пользователя

Страница: 18 / 24

18
B) Setting up the Camera
1) Set the camera to desired Dip-Switch Channel
2) Place the camera at desired location.
3) Plug the power adapter jack into the power jack
4) Plug the power adapter to any DC outlet
5) Mark down the Dip-Switch Channel of each camera. (The receiver
will receive signal from camera’s corresponding Dip-Switch Channel
and display in different channels. For example, Channel 1 on the
TV/Monitor will display the image from Camera 1 only).
Note: The OutdoorWatch4 cameras’ Dip-Switch settings has been pre-
set to 4 different channels (Ch1 to Ch4). Each camera is desig
nated with its own channel
C) Setting up the Receiver
1) Basically, the receiver is already set to match the camera in factory
default. Therefore, receiver will only need to set up if more than one
camera is used. Follow the instruction in “Dip-Switch (Receiver)” to
set the receiver to receive signal from more then one camera.
1
2
OG
ON GDH02
1
2
OG
ON GDH02
Power Jack
Switch