IPCAM-SDII
Quick Start Guide (iPhone)
3
4
1.
Tap on the
“Home”
icon located on the upper right hand corner of
the screen (fig. 2.8). Select
“Device Setting”
(fig. 3.1). Select your
device (fig. 3.2). Select
“Wi-Fi”
(fig. 3.3).
2.
Make sure both
“Enable” & “DHCP”
are enabled (switched to green)
and click
“Search”
(fig. 3.4). Select the Wi-Fi name that is associated
with your network by tapping on the name (fig.3.5).
3.
Once your Wi-Fi name has been selected, type in the password
associated with your Wi-Fi network (fig. 3.6). If the password space is
already filled, delete anything in the space and type in your password.
Now tap on “Save” located on the upper right hand corner of the
screen (fig. 3.7) and tap
“OK”
on the
“Saved Successful”
prompt (fig.
3.7).
4.
Go back to the live view screen. Unplug the Ethernet cable from the
back of the IPCam-SDII. Wait 30-45 seconds for the Wi-Fi access. Wi-
Fi setup complete.
NOTE: STEP 2 must be complete before beginning STEP 3.
NOTE: Password is case sensitive. If the password is incorrect, the
message will still show “Saved Successful”.
NOTE: Your camera screen will freeze once the Ethernet cable is
unplugged. If the password is incorrect, the camera screen will show
“Failed to connect”.
Step 3 Wi-Fi SETUP
Fig2.7
Fig3.1
Fig2.8
Fig3.2
Fig3.3
Fig3.4
Fig3.5
Fig3.6
Fig3.7
