SecurityMan FlashDVR, Руководство пользователя

Страница: 16 / 27

15
comparison to the day time use. The internal rechargeable battery of the Flash-
DVR in night time recording can last up to 4.5 hours (DVR on, Flashlight on).
To record at night time determine the use of audio (cover the mic port with the
rubber plug to mute or vice versa), position the camera at a desire angle, press
the Flashlight button to turn on the flashlight and then press the Record/Stop
button once to start recording. Night time recording visibility is limited to about
16~20 feet, environment may vary. Press the Record/Stop button again to stop
recording.
Underwater recording
There are several preparation steps to prepare before submerging FlashDVR
underwater for recording. To record underwater, please follow these steps:
1. Remove the waterproof plug from the back of FlashDVR by turning it counter
clockwise.
2. Switch the Main LOCK/ON/OFF Switch to the ON position. Turn ON the
flashlight if it is dark or leave the flashlight turn OFF if there is enough lighting
in the environment.
3. Press the Record/Stop button to start recording.
4. In order to avoid the impact of pressure on the buttons, the DVR has to be
in LOCK mode. Switch the Main Switch to the LOCK mode; this can be
accomplished by sliding the Main LOCK/ON/OFF Switch to the LOCK position.
Screw on the waterproof plug securely will prevent water from getting inside
to the Main Switch. In LOCK mode, everything is locked, including all the
buttons control.
5. Finally, to avoid the flow of water from damaging the microphone, please
make sure the microphone port is sealed with the waterproof rubber plug
located near the LED light.
6. FlashDVR is now safe to submerge underwater for recording and exploring.