v1.2 3/2/11
12
Leisure Time
If the Leisure Time reaches the previously set value after manual operation the unit will
automatically run according to Self Act (except when Self Act is set to “Nothing”). If the
parameter in Self Act is “Home Place” the user must ensure that “Home Place” is on. If “Home
Place” is on, the camera will move there even if “Self Act” is set to “Nothing”.
The value of Leisure Time can be set from 1 to 240.
The Leisure Time Menu is found under the Pan
Menu. Move the cursor to “Leisure Time” and press
OPEN
. The
symbol turns to . The parameters
can now be changed. Press
OPEN
to confirm or
CLOSE
to cancel. The symbol will return to
.
Alarm Set
Through Alarm Set the user can set the alarm mode and relay output. The Alarm Set Menu is
found under the Main Menu. Move the cursor to “Alarm Set” and press
OPEN
to enter the
sub-menu. Move the joystick up or down to enter additional menu pages.
Parameters for Alarm Mode are either ON or OFF.
Parameters for AlarmXSet are AUX1(AUX2) Alarm Output Set AUX1 (AUX2)
Alarm Mode OFF = The alarm works when the alarm input terminal and GND are open
circuited. The AUX 1 relay is closed when there is an alarm and opened when there are no
alarms. The setup of AUX2 is the same as AUX1.
Alarm Mode ON = The alarm works when the alarm input terminal and GND are
short-circuited. The AUX 1 relay is open when there is an alarm and closed when there are no
Camera
►
Pan
►
Shortcut Key
Self act
Nothing
Leisure Time
030
Alarm Set
►
Degree
ON
Diagram: 2.f.
Alarm1 mode
CLOSE
Alarm2 mode
CLOSE
Alarm3 mode
CLOSE
Alarm4 mode
CLOSE
Alarm5 mode
CLOSE
Alarm6 mode
CLOSEF
Alarm7 mode
CLOSE
Alarm1 set
AUX1
Alarm2 set
AUX1
Alarm3 set
AUX1
Alarm4 set
AUX1
Alarm5 set
AUX1
Home place
OFF
Leisure Time
30
AS speed
20
PS1 Speed
100
PS1 time
5
PS2 Speed
100
PS2 time
5
PS3 Speed
100
PS3 time
5
Auto Flip
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
