Security Tronix ST-IP2FWD, Быстрый старт

Страница: 12 / 36

ST-IP2FWD QUICK START GUIDE
11
11
2 Installation
Before you start:

Make sure the device in the package is in good condition and all the
assembly parts are included.

Make sure all the related equipment is power-off during
installation.

Check the specification of the products for the installation
environment.

Make sure the power supply is matched with your required voltage
to avoid damage.

If the product does not function properly, please contact your
dealer or t
echnical support.
Do not disassemble the camera for
repair or maintenance by yourself.

Make sure that the wall is strong enough to withstand three times
the weight of the camera.
For the camera
s
that supports IR, you are required to pay attention
to the following precautions to prevent IR reflection:
● Dust or grease on the dome cover will cause IR reflection.
Please do not remove the dome cover film until the installation
is
completed
. If there is dust or grease on the dome cover,
clean the dome cover with clean soft cloth and isopropyl
alcohol.