ST-IP2FTD QUICK START GUIDE
16
16
3
Setting the Network Camera over the
LAN
Purpose:
To view and configure the camera via LAN (Local Area Network), you
need to connect the network camera in the same subnet with your
PC. Then, install the SADP or client software to search and change
the IP of
the
network camera.
The following figure shows the cable connection of network
camera
to
PC:
Figure 3-1
Wiring over LAN
Set the IP address of the camera for accessing via LAN.
Steps:
1.
To get the IP address, you can choose either of the following
methods:
Use SADP, a software tool which can automatically detect
network camera
s
in the LAN and list the device information like
IP address, subnet mask, port number, device serial number,
device version, etc.
