IE Operating Instruction Manual
9
Dynamic IP Address Setting Page:
Network mode
: This can be set to either Fixed or DHCP (Dynamic Host Control Protocol).
IP Address: LAN IP address of the camera
Subnet Mask: Displays the subnet mask of the camera.
Gateway: the gateway is usually the IP address of the Internet equipment which you access to Internet, such
as a router; and setting of correct gateway is necessary when the video camera uses the DDNS, P2P and the
like functions.
Domain name resolution address
: Specify the DNS server that the camera will use to communicate outside
of the local network. Be sure to select a secondary point as a fail over.
PORT:
HTTP: Typically port 80, but this can be changed to tailor a network that may not allow traffic on port 80. Be
sure to include the port number in the URL if you are using a non-typical HTTP port.
2.3.5 DDNS setting
Dynamic domain name
: click and select “On” to enable DNS resolution; select a corresponding domain
name server provider (at present, only dyndns and 3322 domain name are supported). Enter the appropriate
information as required by your DDNS provider.
