background image

User Manual 

This manual includes instructions for using and 

managing the product. Pictures, charts, images and all 

other information hereinafter are for description and 

explanation purposes only. The information contained 

in the manual is subject to change, without notice. 

Please find the latest version on the company 

website.  Please use this user manual under the 

guidance of professionals. 

WARNING:

 THIS PRODUCT CAN EXPOSE YOU 

TO POLYBROMINATED BIPHENYLS, WHICH IS 

KNOWN TO THE STATE OF CALIFORNIA TO 

CAUSE CANCER AND BIRTH DEFECTS OR 

OTHER REPRODUCTIVE HARM. FOR MORE 

INFORMATION GO TO 

WWW.PROP65WARNINGA.CA.GOV

Legal Disclaimer

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE 

CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION 

BEFORE USING THIS PRODUCT IN ORDER TO ENSURE 

THAT YOUR USE CONFORMS TO THE APPLICABLE 

LAWS. OUR COMPANY SHALL NOT BE LIABLE IN THE 

EVENT THAT THIS PRODUCT IS USED FOR 

ILLEGITIMATE PURPOSES. 

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS 

MANUAL AND THE 

APPLICABLE LAW, THE LATER PREVAILS. 

ST-

HDC2FB

ST-

HDC2FB-2.8

QUICK START GUIDE

            www.securitytronix.com

www.nacebrands.com 

Содержание ST-HDC2FB














Отзывы: