Security Tronix ST-HD-BT2812M-2MP, Руководство по установке

Страница: 5 / 8

4
Zoom & Focus
The ST-HD-BT2812M-2MP features motorized zoom and focus, and is
controlled from the CVR via COC (control over coax).
Using the on-screen PTZ controller of the CVR, press the ZOOM -/+
buttons to reach the desired level of zoom. The camera will then auto-
focus. If fine-tuning of focus is necessary, press the
FOCUS -/+ buttons
until the desired focus is achieved.
Switching to Analog Output
If SD (standard definition) analog output is desired, disconnect power
from the camera, then connect the labeled brown and white wires on
the camera to each other before powering the camera back on.
To switch back to HD-CVI output, disconnect power from the camera,
and disconnect the labeled brown and white wires on the camera
from each other before powering the camera back on.
On-Screen Display
To enter the OSD, click the MENU OPEN button on the CVR’s on-
screen PTZ controller, then click ENTER . Navigate the OSD using the
PTZ controller’s up, down, left, and right arrows. Confirm selections by
pressing
ENTER .