Security Tronix HD-COAXINATOR ST-HD-IRPTZ-2MP, Руководство по установке

Страница: 6 / 12

5
Navigate to ADDR INFORMATION and press OPEN to enter.
Change ADDR TYPE to SOFT by moving left or right using your PTZ
controller. Next, navigate to ADDR-SOFT and set your desired address
by moving right to increase, or left to decrease.
Once the desired address has been set, navigate to SAVE and press
OPEN to save the address settings. Finally, navigate to EXIT and press
OPEN on your PTZ controller to exit the OSD MENU .
Basic Operation
The table below is a quick guide to the camera’s basic operations using
a PTZ controller.
Function Operation
Pan/Tilt Move joystick or press arrows left, right, up, or down.
Zoom Out Press WIDE or rotate the joystick counter-clockwise for the
desired image.
Zoom In Press TELE or rotate the joystick clockwise for the desired
image.
Focus Near Press NEAR until there is a clear image.
Focus Far Press FAR until there is a clear image.
Note: the camera will attempt auto-focus after being panned, tilted, or zoomed.
Enter OSD Menu CALL Preset 95
Confirm Menu Selection Press OPEN
Set Left Point WRITE Preset 92
Set Right Point WRITE Preset 93
Begin Left/Right Scan CALL Preset 99
End Left/Right Scan Move joystick or press arrows left, right, up, or down.