Security Labs SLD284, Руководство пользователя

Страница: 36 / 86

JPEG2000 Stand alone DVR User Guide
- 36 -
[CAMERA ACTIVE SETUP]

Use the direction buttons to select an item and press [ENTER] to select ON
and OFF. If a channel is set to OFF at LIVE and ON at RECORD, the channel
will be recorded, displayed during Playback, but will not be displayed at LIVE.
1. [STATUS]

Indicate the camera status: ACTIVE means the video input status is normal,
and LOSS means the video is lost.
2. [LIVE]

Set up the channel to be displayed or not at the LIVE screen.
3. [REC]

Set up the channel to be recorded.
[MOTION SETUP]
1. [CHANNEL]

Select a channel for the setup.
2. [SENSITIVITY GRADE]

Adjust motion detection sensitivity. 1 (LOW)~4 (VERY HIGH)
3. [MOTION DISPLAY TYPE]

Setup the display type that marks the motion area.

BOX - shows block / CELL - shows green lattice
4. [RECORD DURATION]

The DVR record for duration from the time motion is detected. If the DVR
detects motion continuosly, the DVR keeps recording through out the event, and the duration after the last motion
event. For example, the duration is set to 10 seconds and the motion last for 3 minutes. The DVR records for 3
minutes and 10 seconds.
5. [NUMBER OF CELLS TO DETECT]

It will only be triggered when the cells in motion are MORE THAN the number the user has set. So the smaller
the number is, the more sensitive the detection is.
[MOTION MASK SETUP]
Users can set up which area to detect motion and which not to detect. The area
that is marked not to detect motion is Grey.

Press the number button to select the channel.

Set motion detection area. Use the Direction buttons to move the cursor and
press [ENTER] to mark the area.

Press [Mode] to change the editing mode. The editing modes are as below:
1.Cell : Move to the desired location and press [ENTER] to activiate or
deactiviate the motion detection in the marked area cell by cell.
2.ALL ON
: Change the mode to ALL ON and press ENTER to activate the motion detection in the whole window.
3. ALL OFF : Change the mode to ALL OFF and press ENTER to deactivate the motion detection in the whole
window.