60
Parameter
Function
Record Delay System can delay the record for specified time after video
masking alarm ended. The value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output
port so that system can activate corresponding alarm device when
alarm occurs.
Please note the relay output number here is for reference
only. The alarm output number may vary due to different
series products.
Alarm Delay
System can delay the alarm output for specified time after motion
detect alarm ended. The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert
you when alarm occurs.
PTZ
Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.
The event type includes: preset, tour and pattern and etc.
Snapshot
It is snapshot activation function.
3.5.2 Alarm
The alarm activation interface is shown as in Figure 3-49.
Figure 3-49
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
You need to check the box to enable this function.
Содержание IPPTZ-EL2MPL12X-Mini-F
Страница 1: ...IPPTZ EL2MPL12X Mini F Operation Manual Version 1 0 0 ...
Страница 61: ...57 Figure 3 45 Figure 3 46 Figure 3 47 ...
Страница 66: ...62 Figure 3 50 Figure 3 51 Figure 3 52 ...