Security Brands Edge 27-210, Руководство по прямому программированию

Страница: 76 / 80

Direct Programming Manual
Edge
Smart Keypads and Card Readers
72

If you need help, please email techsupport@securitybrandsinc.com or call (972) 474-6390 .
Configure Wiegand Validation Method
These procedures will configure the validation method used on the Wiegand inputs.
Wiegand Input 1
1251
$
6
$
1
$
505
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 1 (for Wiegand Input 1). No tone will sound.
Enter secondary sub mode 505 and listen for good tone.
Enter 1 (for validate facility and access code) or 2 (for validate access code only) and listen for
good tone.
Enter # to exit Programming Mode.
Wiegand Input 2
1251
$
6
$
2
$
505
$
X
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 2 (for Wiegand Input 2). No tone will sound.
Enter secondary sub mode 505 and listen for good tone.
Enter 1 (for validate facility and access code) or 2 (for validate access code only) and listen for
good tone.
Enter # to exit Programming Mode.
Change Wiegand Code Length
These procedures will change the code length on the Wiegand inputs from 4 to 11 digits.

IMPORTANT! COMPLETING THESE PROCEDURES WILL DELETE ALL WIEGAND CODES!
Note: This option is only available with the SBI Flex 64-bit format selected.
Wiegand Input 1
This procedure will set the code length for Wiegand Input 1.
1251
$
6
$
1
$
506
$
XX
$
1251
$
#
Enter Master Code (default 1251) and listen for good tone.
Enter sub mode 6 and listen for good tone.
Enter 1 (for Wiegand Input 1). No tone will sound.
Enter secondary sub mode 506 and listen for good tone.