Security Brands Edge 27-210 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 80

background image

Direct Programming Manual

Edge

Smart Keypads and Card Readers

50



If you need help, please email

[email protected]

or call

(972) 474-6390

.

Enter # key to exit Programming Mode.

Note: This procedure will not work if any of the following are true:



Wiegand input is set to SBI Flex 64-bit format.



Wiegand input is disabled.



Wiegand input is configured to share code list with non-Wiegand codes.



Split relay feature is enabled.

Scan Entry for Wiegand Card Readers and Vehicle Tag Readers

This procedure will add one or more latch codes with a specified facility code by scanning for a
Wiegand card reader or vehicle tag reader. Only the 26-bit format can be used.

1251

$

6

$

1

$

105

$

4

$

Scan First Card

$

...

$

Scan Last Card

$

#

Enter Master Code (default 1251) and listen for good tone.

Enter sub mode 6 and listen for good tone.

Enter 1 (for Wiegand Input 1). No tone will sound.

Enter next sub mode 105 and listen for good tone.

Enter next sub mode 4 and listen for good tone.

Scan card to be added twice at reader and listen for good tone.

Repeat above step to add additional codes.

Note: Card-to-card swipe timeout is 10 seconds.

Enter # key to exit Programming Mode.

Note: This procedure will not work if any of the following are true:



Wiegand input is set to SBI Flex 64-bit format.



Wiegand input is disabled.



Wiegand input is configured to share code list with non-Wiegand codes.



Split relay feature is enabled.

Add Latch Code(s) to Relay B on Wiegand Input 2

These procedures will add a latch code or codes to Relay B for Wiegand keypads, card readers,
remotes, and vehicle tag readers on Wiegand Input 2 only.

Quick Entry for Wiegand Keypad (uses default facility code)

This procedure will add one or more latch codes with the default facility code for a Wiegand
keypad. Both the 26-bit and SBI Flex 64-bit formats can be used.

1251

$

6

$

2

$

105

$

1

$

XXXXX

$

#

Enter Master Code (default 1251) and listen for good tone.

«
...
52
53
54
55
56
...
»

Содержание Edge 27-210

















































































Отзывы:

Нет отзывов

Похожие инструкции для Edge 27-210

Бренд: Jensen Страницы: 12

VM9213 - Touch Screen MultiMedia Receiver

Бренд: Jensen Страницы: 62

Бренд: Jensen Страницы: 9

Бренд: Jensen Страницы: 22

JHD3510 - Heavy Duty CD Receiver

Бренд: Jensen Страницы: 2

VM8013HD - Screen MultiMedia Receiver

Бренд: Jensen Страницы: 78

Phase Linear UV10

Бренд: Jensen Страницы: 90

Бренд: Teac Страницы: 56

Бренд: Majestic Страницы: 13

SAINT MALO RCM 127

Бренд: Blaupunkt Страницы: 23

Бренд: Netum Страницы: 26

Бренд: Brainboxes Страницы: 2

Language Master LM-1

Бренд: Eiki Страницы: 16

Бренд: RTscan Страницы: 8

Бренд: Viking InterWorks Страницы: 10

Бренд: Rocstor Страницы: 2

Бренд: Jensen Страницы: 95

Бренд: Compaq Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды