WT-M-1602–30-00IC
/
2 5
How to use
WT-M-1602-30-00IC It comes from the factory with no card defined. After installing the battery, the first card
you have read will be assigned as the administrator card.
You have to set the administrator card before using it. 24 cards can be defined to the lock, 1 of which is an
administrator.
The administrator card is authorized to register, delete and unlock other cards.
Card Types
WT-M-1602-30-00IC 4 di
ff
erent authorization type cards can be registered to the model lock.
1. Administrator Card
2. Main Card
3. Service Card
4. Visitor card
Registering Cards
The first card to be registering is under administrator authority.
2. Register to the Administrator Card
2.1.After inserting the lock battery, have the card you set as the administrator read into the lock. The
green unlock light turns on and you will hear 1 beep. The administrator card is registered.
⚠
Remember: The administrator card does not unlock in a single reading. If you want to unlock with an
administrator card, you have to have it read it 4 times consecutively.
3. Single Card Operating Mode
In single card operating mode, administrator card, main card and visitor card can be used. 5 cards,
including 1 administrator, 1 visitor and 3 main card, can be register to the lock.
3.1.
Register the Visitor Card:
Have the administrator card read. The green unlock light will start
flashing. In this case, you can register the card you want to assign as a visitor by having it read on
the lock. You will hear a beep when you have the visitor card read. The unlock light will stop
blinking within 5 seconds after you register is completed. The card will be saved in the lock's
memory. From this moment on, the lock can be unlocked by reading the visitor card on the lock.
When you register another card as a visitor card, the previous registered visitor card will be
deleted.
3.2.
Register the Main Card
3.2.1.
Registering Single Main Card:
Have the 3 times administrator card read. The green
unlock light will start flashing. In this case, you can register the card you want to assign as
the main card by have do read it to the lock. You will hear a beep when lock read the card.
The unlock light will stop blinking within 5 seconds after registering is completed.
3.2.2.
Registering More Than One Main Card
: Have the 3 times administrator card read. The
green unlock light will start to flash. In this case, you can register the cards you want to
assign as the main card by have do read it to the lock one after the other. Note that a
maximum of 3 main cards can be registered.
SECURITURK
Document No: S20202K00020
