Adding or Over-writing a user code
1. Enter the six digit administrator code (Factory default 1-2-3-4-5-6)
2. Once a correct code is entered the “Opening” L.E.D. will light for 5 seconds.
3. During this period, press and hold the
‘Enter’
button until the “Programming” L.E.D.
comes on
4.
Key-in the user number to add or change
‘1’
to
‘8’
then
‘ENTER’
5. Key-in your new six-digit user code followed by
‘ENTER’
6.
Key-in your new six-digit user code again followed by
‘ENTER’
7. A successful code change is signalled by the “Ready for Opening” L.E.D. lighting up
for three seconds. A failed code change is signalled by the “Reject” L.E.D. lighting up
for three seconds.
Deleting a user code
1. Enter the six digit administrator code (Factory default 1-2-3-4-5-6)
2. Once a correct code is entered the “Opening” L.E.D. will light for 5 seconds.
3. During this period, press and hold the
‘Enter’
button until the “Programming” L.E.D.
comes on
4.
Key-in the user number to delete
‘1’
to
‘8’
then
‘ENTER’
5. Key-in
‘
ENTER’
6.
Key-in
‘ENTER’
again
7. A successful code deletion is signalled by the “Ready for Opening” L.E.D. lighting up
for three seconds. A failed code change is signalled by the “Reject” L.E.D. lighting up
for three seconds.
Setting the Time Delay
1. Enter the six digit administrator code (Factory default 1-2-3-4-5-6)
2. Once a correct code is entered the “Opening” L.E.D. will light for 5 seconds.
3. During this period, press and hold the
‘Enter’
button until the “Programming” L.E.D.
comes on
4.
Key-in
‘9’
then
‘ENTER’
5.
Key in the two digit delay time
‘00’
to
‘99’
then
‘ENTER’
(00 = No Delay)
REPLACING THE BATTERIES
It is recommended to replace the batteries as soon as the
‘Battery Low’
signal shows. The low
will operate however for at least a further 50 operations. While the low battery signal is on, no
programming is allowed.
To change the batteries, lift the cover of the battery compartment with the tip of a screwdriver.
Install 3 off AA Alkaline type batteries paying attention to the polarity. Reinstall the battery
cover.
Securikey Ltd PO Box 18 Aldershot Hampshire GU12 4SL
T
: +44(0)1252 311888
F
: +44(0)1252 343950
E
