Product Name: (Wireless Router) Model Name:
Pairing Sensors
This typically involves the following steps:
1)
On the (Wireless Router) LCD, inside the “Add sensor” section tap “Add”.
2)
Set the sensor/device in pairing mode as per its instructions.
Controlling Sensors and (Wireless Router)
(Wireless Router) and the connected sensors can be controlled through a variety of interfaces:
1)
(Wireless Router) iOS App
2)
(Wireless Router) Android App
3)
Remote Web Interface: https://connect.securifi.com
4)
Local Browser Interface: http://10.10.10.254 (default)
5)
LCD UI.
Range Extender Location
Ideal location is 50-100 feet from the main router epending on the number of walls. Please also
make sure it is not so far from the main router that it can’t maintain a stable connection with the
main router.
Trouble Shooting
1)
How can I change the Wireless Network (SSID) name and Password?
You can edit these settings in the “Wireless” app on the LCD.
2)
I just finished setting up the Range Extender. Why am I not seeing any improvement in the Range?
Please note that the Range extender by default creates a new wireless network with (Wireless Router) appended to your
original network’s name.
3)
Can I have the same name for the extended network as my main network?
Yes, you can change the network name in the “Wireless” app on the LCD.
4)
In the range extender mode, (Wireless Router) was unable to connect though I am close to the main Router.
Some routers don't allow you to connect range extenders. Please try using the “Wireless WAN” app on the LCD for such routers.
Join our Forums
Get the most out of your (Wireless Router) and learn from the Pros in our Forums.
We also have sensor giveaways from time to time.
http://forum.securifi.com
Securifii Ltd, 4F, No.65, Songde Rd, Xinyi Dist, Taipei City 110, Taiwan (R.O.C.)
Email: [email protected] Ph: +886.2.2726.0100, Fax: +886.2.2726.2006
www.securifi.com