0
12V / 24V
Portable Jump Starter
With Fuel-Gauge Indicator
SS105 User’s Manual
For both Gasoline
and Diesel Engines
1
Getting to Know Your SecureStart™
Prepare Your SecureStart™ Before First Use
STEP 1:
Upon purchase, disconnect the external 13-cell D size alkaline battery pack
that is connected with a wire connector to the SecureStart™ by pulling the connecting
wire out. Discard this 13-cell alkaline battery pack.
STEP 2:
Insert and connect the jumper link into the unit. Mount the jumper cover
plate with the screw. The jumper link is to connect the built-in NiMH battery to replace
the discarded 13 D-size cell alkaline battery for backup purpose.
Note: The 13 D-size cell alkaline battery is for backing up the SecureStart™ Lead Acid
battery during storage before sales for limited period only.
WARNING: DO NOT allow the cable clamps to TOUCH each other
! The
cable clamps carry electrical current at all times. If they touch each other, severe
sparks may cause personal injury and battery explosion. Use only the wall
adaptor supplied with your SecureStart™ for charging. To avoid damage, do not
use any other chargers or apply any other charging methods.
!
Cable Clamps
Fuel-Gauge
Indicator
Fuel-Gauge
Switch
DC Charging
Socket
13 cells D size Alkaline Battery
Pack with connector wire
Wall Adaptor
Input: 100-240Vac 50/60Hz
auto switching
Output: 24V DC 2.5Amp
Selector switch
Jumper link cover
13 cells D size alkaline
battery input jack
