10
OPERATION
If you chose to have your bollard installed by a
SecureSpot technician, your bollard will be setup for
you, ready to use.
Point your remote control in the direction of your bollard
and press the left “lock” button to raise your bollard into
the upright position, to secure your car spot.
To unlock, point your remote control in the direction of
your bollard and press the right “unlock” button to lower
your bollard to the ground, to then park in your car spot.
Your remote control
s’
range is up to 15 metres.
REMEMBER TO SLIDE THE COVER OVER THE BUTTONS WHEN NOT
IN USE, TO PROTECT THEM FROM ACCIDENTALLY BEING PRESSED.
MAINTENANCE
Set a reminder in your calendar to recharge your
bollards’ battery approximately every 10
-12 weeks.
At that time, it is also recommended that you give your
bollard a wipe down with a cloth, and clear any dust or
debris from the area.
