9
ASPHALT INSTALL
YOU’LL NEED:
•
10mm Drill Bit
•
10mm Plugs x 3
•
8mm Screws x 3
•
Washers x 3
STEP BY STEP GUIDE:
1.
Carefully remove bollard from box and place
bollard in car space. The bollard should be
central to the car space and the front of it
should be 1-1.2m in.
2.
Remove the bollard cover.
3.
Using the holes on the base plate as a guide,
drill 3 holes into the ground. If you hit any
underground cabling, simply reposition bollard
slightly.
4.
Move bollard aside and hammer plugs into the
holes.
5.
Replace bollard over the plugs
6.
Put washers on screws and slowly tighten with
drill.
7.
Connect battery and replace bollard cover,
ensuring it’s locked properly.
8.
Test
–
ensure bollard goes up and down
properly.
9.
Pack up tools ensuring you haven’t left anything
behind and clean area.
