2
V‑5052D INSTALLATION GUIDE | DIGITAL MONITORING PRODUCTS
Figure 4: Standard Mounting
Figure 5: Heavy Duty Mounting
MOUNT THE CAMERA
2
The camera design offers two options for mounting: standard mount using the included mounting base or
heavy duty mount using the included anchoring hardware.
Standard Mount
Refer to Figure 4 during standard mounting. Use the included screws and wall anchors to secure the mounting
base to a wall or ceiling, then snap the camera onto the mounting base.
Heavy Duty Mount
Refer to Figure 5 during heavy duty mounting. Drill holes in a wall or ceiling for mounting. Thread the included
mounting bolts into the bottom of the camera base. Insert the bolts through the mounting surface. Thread the
anchoring discs onto the bolts and tighten to the surface.
Adjust the Camera
Refer to Figure 6 when adjusting the camera.
1. Use a the included L‑key to remove the
camera’s cover.
2. Use the camera’s 3‑axis gimbal to adjust the
pan and tilt angle as needed.
3. Reattach the cover.
Figure 6: Adjusting the Camera
Tilt
0° - 70°
Pan
0° - 360°
