Revised: 03/27/17
WIRELESS RECEIVER
ALERT WITH BED
SHAKER AND
12V POWER ADAPTER
Continued
Please see our complete line of Secure
®
fall/wandering prevention & patient safety products
at www.SecureSafetySolutions.com
Highest Quality...Lowest Prices...Guaranteed!
Personal Safety Corporation • Hiawatha, Iowa 52233 • 800.373.2873
BED SHAKER
Setup
The bed shaker only functions when connected to the CAS-
WCR receiver with the bed shaker ON/OFF switch in the ON
position. In addition, the 12V power adapter (included) must
be connected for the bed shaker to function.
#1
12V Power Adapter Input:
Before using bed shaker,
you must first plug the 12V power adapter (included)
into the Power Adapter Input Jack.
#2
Bed Shaker On/Off:
Slide switch to turn bed shaker
function On/Off.
#3
Bed Shaker Out:
Insert the bed shaker plug into the
Bed Shaker Out Jack.
#4
12V Ready Indicator Light:
Indicator light will light up
red when 12V adapter is connected correctly.
#5
Pad ON Indicator:
When the bed shaker On/Off switch
is moved to the “ON” position, the LED indicator will
light up red to indicate the bed shaker function is “ON”.
Notes
The bed shaker will not function without the 12V power
adapter being connected to the back of the CAS-WCR.
When the bed shaker is activated, it will vibrate continuously
for 15 seconds.
The 12V Ready & Pad On indicator lights will illuminate Red
when in use.
The 12V Ready & Pad On indicator lights will illuminate Red
when in use.
ONE YEAR LIMITED WARRANTY
Personal Safety Corporation warrants this product to be
free from factory defects and workmanship for a period
of one year from date of purchase. Warranty is void if this
product is misused, abused or damaged. No warranty or
responsibility of use expressed or implied.
FCC STATEMENT:
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH
THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE
LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE
IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO
FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.