Securam ProLogic L01-C, Руководство по эксплуатации

Страница: 4 / 20

ProLogic L01-C Operation Instructions
4

Carefully tuck the excess lock cable into the cavity on the back of the EntryPad and install the
EntryPad on the shoulder bolts. See Fig. 2.

Be careful not to crimp or damage the lock cable upon EntryPad installation.
1.4.2 Installing the Battery – SureLock Battery Compartment (removable battery compartment)

Locate the SureLock Battery Compartment at the 5 o’clock position of the EntryPad. See Fig. 3.

Release the latch of the battery compartment, by pulling lever downward. See Fig 4.

Pull out the battery compartment from the bottom of the EntryPad. See Fig 5.

Install a new 9V alkaline battery (Duracell or Energizer brands are recommended) into the
compartment. The battery compartment will only receive the battery when the positive and
negative terminals are oriented correctly. See Fig. 6

Put the battery compartment back into the EntryPad. Push the latch of the battery
compartment up until it snaps closed. See Fig. 3
1.5 Testing the Lock Operation
The ProLogic L01-C comes with two factory default codes:
•
Super Code (ID00) is 111111
•
Manager Code (ID01) is 123456
Enter one of the valid codes to verify the communication between the lock and EntryPad. The lock will
open.