Securacom SEC8, Руководство пользователя

Страница: 10 / 40

10 P0031-LU-01.00
Stay Arm 1 -
S
The stay arming mode is used for protecting some of the detection zones and is normally
used when the premises remain occupied. The system has three stay arm modes which
allow the system to be setup for three different protection scenarios. For example “Stay Arm
1” could be configured to provide perimeter protection only, whilst “Stay Arm 2” provides
perimeter and downstairs protection.
To stay arm your alarm system, please proceed as follows:
Ur
User Menu
01: Stay Arm 1
Exit Now: 010
18:30 28/04/2011
Enter your access code .
????
Press the
S
key.
The display shows the remaining time
before the system is armed.
Perimeter Only
18:38 28/04/2011
10
--
The system is now stay armed.
Armed on
Bypass on
If the Quick Stay Arm feature is enabled at the selected remote keypad, you may
omit step 1 when performing a Stay Arm 1 from the above procedure.
Stay Arm 2 -
2*
This option allows you to select the second stay arm mode. Follow the procedure for stay
arm 1 (above), and enter
2*
at step 2.
Stay Arm 3 -
3*
This option allows you to select the third stay arm mode. Follow the procedure for stay arm 1
(above), and enter
3*
at step 2.