11
Copyright © 2016 – Secura Inc. - All rights are reserved. http://www.thesecura.com
ATTACHING/DETACHING THE ACCESSORIES
ATTENTION !
NEVER attempt to attach or detach the accessories when the
appliance is heated up. You run the risk of Burns!
Steam iron operation
• Without any accessories attached you can use this appliance
as a traditional steam iron.
• Choose a reasonable temperature setting according to
different fabrics, such as “…” for COTTON, “..” matches with
WOOL, “.”matches with NYLON and SILK.
• The low setting "." may not heat the water enough to
generate steam and should be used when you are going to dry
iron.
Fabric bristle brush operation
• Assemble the Fabric bristle brush with the soleplate; you can
brush dust from; clothes, sofas, curtains, blankets or other home
textiles. Assembly instructions: Line up the notch on the head of
the steamer to the notch on the head of the Fabric bristle brush,
locking it to the head of the soleplate, then press the back of the
fabric bristle brush until it locks against the soleplate, you will
hear a “click”. When you hear the “click” the attachment is locked
in place.
• Removal instructions: Hold the handle in the middle (close
to the “OPEN” switch) with one hand, using your thumb, slide
the “OPEN” switch to the right until the attachment unlocks from
the handle. Once the attachment unlocks from the handle, lift
the attachment straight up and slightly forward to separate the
attachment fully from the handle. To avoid damaging the fabric
bristle brush, it’s necessary to adjust the temperature control to
position “..”.