4
Preparing your kettle for fi rst time use:
1. Remove the lid and fi ll the kettle with cold water until it reaches the MAX line on the
WATER LEVEL DISPLAY.
2. Secure the lid on top of the kettle, place the kettle onto the base and plug the power cord
into an outlet.
3. Press Quick Boil and then press START. The START button will change from blue to red
and remain on until the water comes to a boil (212°F). Once the water boils, the kettle turns
off automatically and the START button will return to blue.
4. Carefully remove the kettle from the base, discard the water and allow the kettle to cool for 1
minute.
5. Repeat steps 1-4 again to remove any production residue from the interior of the kettle.
NOTE:
Do not consume the water used during the preparation process. It should be discarded
immediately.
KETTLE PREPARATION
Copyright 2017 - 2018 Secura, Inc. All rights reserved. www.thesecura.com
SAFETY INSTRUCTIONS
The kettle and base should always be placed on a stable, fl at and dry surface.
•
Never touch the metal exterior of the kettle or lid while in use. The handles on the kettle
•
and lid remain cool, but the body of the kettle and lid will be very hot.
Never attempt to use the kettle without the lid seated securely on top of the kettle.
•
If the Keep Warm function has not be set, the kettle turns off automatically when the water
•
has reached the desired temperature.
The kettle turns off automatically when removed from the base.
•
Be careful of steam coming from the lid vents or spout, especially during pouring or if
•
adding water immediately after boiling.
The Boil Dry Protection Sensor turns the kettle off automatically when it detects that the
•
kettle is empty. If The Boil Dry feature is activated, please allow the kettle to cool down at
least 15 minutes before refi lling.
