7
1. Enter Program Mode
*
(Master Code) #
Add Card User
2. Add Card: Using Auto ID
(S2-MF reader will automatically assign the
next available User ID number to Card)
1 (Read Card) #
The cards can be added continuously.
For example: 1 (Read Card1)(Read Card2)...#
Note:
After read card, Card link to an available User ID number.
OR
2. Add Card: Using User ID
(Manager set a specific User ID to Card,
same User ID can be assigned to different
cards, but this is a bad practice)
1 (User ID) # (Read Card) #
(User ID is any number from 1-1000)
The cards can be added continuously.
For example: 1 (User ID)#(Read Card1)#1(User ID)#(Read
Card2)...#
(Note: each User ID should begin with 1)
3. Exit
*
6.3 Delete Users
Programming Steps
Keystroke Combination
1. Enter Program Mode
*(Master Code) #
Delete Card
2. Delete Card - By Card
OR
2. Delete Card - By User ID
(if two cards have the same User ID, the first
one added will be deleted, but others cards
with same User ID still valid, and can only be
deleted using Delete by Card method)
2 (Read Card) #
The cards can be deleted continuously.
For example: 2(Read Card)(Read Card)….#
2 (User ID ) #
The cards can be deleted continuously.
For example: 2(User ID)#(User ID)#….#
After deleting User ID, the associated card will be deleted,
too.
Delete All Users
2. Delete All User
2 (Master Code) #
Note: All configuration data is retained.
3. Exit
*
6.4 Set Relay Configuration
The relay configuration sets the behavior of the output relay on activation.
Programming Steps
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
