DOORPHONE INSTALLATION
LIVE VIDEO*
(1) Secure the wall bracket ona stable surface
(2) Mount the RVDP ontothe wall bracket
(3) Secure the RVDPvia the screw supplied.
Note:
(A)
Battery Power Optionis beingillustrated here, therefore if youwish to
power the RVDPvia existing doorbellwires or optional adaptor, please refer to
owner's manual for moredetails.
(B) Before installation begins,it is suggestedto turn on the "Power Saving" modesoyou canhave continuousconnectionvia the
live-videowhile defining the installation location/height. Please refer to Power Saving Mode section ofthis document.
SETUP THEDOORChimeW/ Video Door Phone
1. Insert Batteries
⇨
Put in three AA batteries into the DoorChime
2.
Pressed the Pairing button on the Door Chimefor three secondsto enter pairing
mode.(See illustration on the right) Blue light will start blinkingon the front of
the Door Chime
3.
Put the Video door phoneinto pairing modeby below two methods:
I.
Unplugthe ACpower of the Video door phone then plug in again.OR
II.
Removethe batteries then insert it again
4.
Once the video door phone is connected to the Door Chime,Door Chimewill ring
with the default ring tone and video door phonewill ringas well.
5.
Pairing is completed!
ALC Electronics B.V
.
Ericssonstraat 2
5121 ML Rijen | The Netherlands
www.secufirst.eu
Brand
a
24
™
