6. A
CCESSORIES
Universal Test Probes Set
Set of individual test probes in a rugged case. Two configurations are available:
“Small” Set
•
3
×
2-pole current probes (for single currents and return)
•
1
×
4-pole current probes (for three currents and common return)
•
6
×
single pole probes (for voltages, trips and signals)
“Large” Set
•
6
×
2-pole current probes (for single currents and return)
•
2
×
4-pole current probes (for three currents and common return)
•
12
×
single pole probes (for voltages, trips and signals)
Description
Order Code
Universal Test Probe Set “Small”
USTP1
Universal Test Probe Set “Large”
USTP2
Handles for STP Test Plugs
STP Test Plugs can be built with a handle, which helps with the easy and even insertion
into the test block (in particular for test blocks with many poles).
The handle option needs to be specified upon test plug order - please compare the
ordering information section of this document.
Three handle options are available:
•
STP Test Plug with standard handle
•
STP Test Plug with handle, with two fitting screws (M4) to affix the plug to the
panel during testing. These fitting screws are compatible with the threaded hole
cutouts required for
S
ECU
C
ONTROL
ITS dust covers
•
STP Test Plug with handle, with fitting screws (6-32 UNC) to affix the plug
to the panel during testing. Note: the 6-32 thread is NOT compatible with the
threaded hole cutouts for standard
S
ECU
C
ONTROL
dust covers (M4)
20
