Made in Germany
www.secu-gmbh.de
1.3 Detailed description of selected basic functions
1. Opening the safe using the factory code
• Press the On/Enter key
• The Code/Fingers** indication is displayed (**in case you possess
electronics without fingerscan, Code is displayed instead.
• Enter the factory set code
123456
• The instruction Please turn knob is displayed
Attention: The message Please turn knob implies the action with the knob of
the locking unit, for which the opening code has been entered.
2. Changing the administrator code
• Press the On/Enter key
• The indication of Code/Fingers* is displayed
• Press the Function key
• The Change code menu is displayed
• Press the On/Enter key
• The indication of Administrator is displayed
• Press the On/Enter key
• The indication of the Old code is displayed
• Enter the factory set code
123456
• Press the On/Enter key
• The indication of the New code is displayed
• Enter the new code
• Press the On/Enter key
• The indication of Repeat code is displayed
• Enter the new code
• Press the On/Enter key
• The indication of Code successfully changed is displayed
3. Creating a user with a code:
• Press the On/Enter key
• The indication of Code/Fingers** is displayed
• Press the Function key
• The Change code menu is displayed
• By pressing the key 2 reach the Administrator menu
• Press the On/Enter key
• Admin setup Create user is displayed
• Press the On/Enter key
• Create code is displayed
• Press the On/Enter key
• At this point you are asked to enter the admin. code (factory setting
123456)
• The indication of User 00x is displayed
• Please enter the user code and confirm it with ENTER
• Press the On/Enter key
• FS combination to be confirmed with ENTER*** is displayed
• Press the On/Enter key and accordingly the Function key
• After confirmation, Save with the On key is displayed.
SELO-B
2
SELO-BF
2
SELO-BFE
2
4
***If a user with a value of 1 (right to open alone) should be created, the
message FS combination to be confirmed with ENTER must be
followed by pressing the Function key. If the user should be assigned
access in combination with a fingerscan only, this inquiry is to be
confirmed with ENTER.
4. Creating a user with an E-Key:
• Press the On/Enter key
• The indication of Code/Fingers** is displayed
• Press the Function key
• The Change code menu is displayed
• By pressing the key 2 reach the Administrator menu
• Press the On/Enter key
• Admin setup Create user is displayed
• Press the On/Enter key
• Create E-Key is displayed
• Press the On/Enter key
• At this point you are asked to enter the admin. code (factory setting
123456)
• FS combination to be confirmed with ENTER*** is displayed
• Press the On/Enter key and accordingly the Function key
• User 00x Store E-Key using ENTER is displayed
• Press the On/Enter key
• E-Key in Prog mode, continue with Enter is displayed
• Press the On/Enter key
• After confirmation, Save with the On key is displayed.
***If a user with a value of 1 (right to open alone) should be created, the
message FS combination to be confirmed with ENTER must be
followed by pressing the Function key. If the user should be assigned
access in combination with a fingerscan only, this inquiry is to be
confirmed with ENTER.
5. Storing a user with fingerprint*:
• Press the On/Enter key
• The indication of Code/Fingers** is displayed
• Press the Function key
• The Change code menu is displayed
• By pressing the key 2 reach the Administrator menu
• Press the On/Enter key
• Admin setup Create user is displayed
• Press the On/Enter key
• By pressing the key 2 reach the Create fingerscan menu
• Press the On/Enter key
• At this point you are asked to enter the admin. code (factory setting
123456)
• The indication of Create fingerscan is displayed
• The indication of Store finger is displayed
• This procedure is repeated several times
• After a successful entry the indication User xxx successfully created
is displayed
