Security & Electronic Technologies
Seite
4
-
The mathematical calculation in the LC device is designed only for cylindrical and cubic tank
types, special shapes can´t be considered.
-
Only a specialist licensed company is allowed to modify the tank,
in case there is a need to drill or cut holes in the tank!
–
you lose the warranty and in case of damage you are personally liable.
-
Wrap the thread with Teflon tape to ensure a good seal with the tank.
-
If the tank is refuelled (actual tank contents is higher than the value from the day before) the
statistics (average day demand, remaining days) are reset automatically.
-
Please note that the battery life of the device depends from settings like permanent display and
measurement in the test mode.
-
The LC is a simple device, which helps you to measure tank contents.
This is an electronic device and so it is possible to get an error so that the display shows wrong
values. Always monitor the system to ensure it provides correct data and allows you to ensure
manage your stocks to avoid problems, e.g. an empty tank.
-
Take the time (which you have saved with the LC device) and control the tank continuous, so
that it is always in good order and condition.
-
Please note the legal requirements for your tank and if you have concerns ask a license
specialty company.
-
Always take a look to the service intervals of your tank and a specialist licensed company
should advise you, that your tank meets the legal requirements (e.g. heating oil tanks should be
equipped with a limit indicator for working with overfill protection system
-
For using the SMS-function it is necessary that a sufficient telephone network is available. If the
signal from the telephone network is bad (no signal) then the LC200 hasn´t the possibility to
send a SMS.
Checking the contents of delivery
Please, check the contents of delivery immediately after receipt and unpacking.
In case of missing components or transport damages contact your local dealer
or our representative.
Hint:
Please keep the original packing material if you have to send the instrument to a service
facility. Keep these operating instructions in case you hand over the instruments to another
person.
LC 200:
Unit LC 200,
Installation Instructions
