www.secretsmoke.com
Instruction Manual SSPRE6
Instruction Manual SSPRE6
E. Temperature Range Setting
Press the ▲ and ▼ the same time,Upper frams is ‘LK’, Down frame set to ‘88’,
Press SET,Upper frame Is ‘rL’,down frame is ‘0’,then Press SET,Upper frame is
‘rH’,Down frame is the temperature range you are going to set.
NOTES
1.’SET’ Key is pressed for control mode,every time you pressed SET 4 seconds,the
upper frame will come out the prompt,Press ▲or▼,set the down frame the
value you need,If no key was pressed in 1 minutes,the controller will be back to
standard mode!.
2.Controller Prompt Parameter self-setting, Press▲20 seconds,Upper Frame
show AT,The controller is self-setting,the temperature will roll over1-2 times,then
the self-setting is finished, AT light be off,The controller will be controller by new
prompt parameter, and be saved forever.
‘LK’—‘88’
‘rL’—‘0’
‘rL’—‘temperature range’
AT light is Red, self setting
