HARDWARE LIST
A
B
C
D
E
F
G
H
I
DOWEL 6 X 30MM
20 PCS
BOLT M7X 60MM
4 PCS
SCREW M3.5 X 16MM
4 PCS
ALLEN KEY
1 PC
CAM BOLT+CAM NUT
8 SETS
BOLT M6 X 50MM
PLASTIC FOOT
20 PCS
8 PCS
L SHAPE HINGE
2 PCS
HINGE (L&R)
1 SET
(SCREWDRIVER NOT PROVIDED)
USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED.
STEP 1 - PUSH CAM BOLT INTO INSERT
STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW OF
THE CAM LOCK IS POINTING TOWARD ON THE EDGE OF THE PANEL.)
STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK. YOU THEN TURN THE LOCK SO
THE NARROW PART CLOSES OVER THE BOLT.
Page 03
SEC/SH/01/21/EU2
