2 Software
Second Generation RFID Smart Reader
17
Management: Ethernet
LAN Settings
You can configure the local network settings of the Reader on this page.
Host Name:
Host name of the Reader.
IP Address:
Enter the local network IP address for the Reader. The IP address is also the
one that you enter when logging in to
this Web UI. The default IP address is “192.168.0.1”.
Note:
It is strongly suggested that you use the default address for the LAN port at all times
so that one can easily access the Reader.
Subnet Mask:
The subnet mask along with the previously configured IP address defines
the network. The default value for the
subnet mask is “255.255.255.0”.
DHCP Start IP:
Define the starting value of the IP addresses to be given to LAN users
connecting to the Reader
DHCP End IP:
Define the last value of the IP address to be given to LAN users connecting
to the Reader.
Lease Time:
In Lease Time you can specify a period of time after which an assigned IP
address will be retrieved from devices due to the fact that there has been no network
activity during the specified time.
