Seco Q7-928, Руководство пользователя

Страница: 2 / 45

Q7-928
Q7-928 User Manual - Rev. First Edition: 1.0 - Last Edition: 3.0 - Author: S.B. - Reviewed by P.Z Copyright © 2016 SECO S.r.l.
2
All rights reserved. All information contained in this manual is proprietary and confidential material of SECO S.r.l.
Unauthorised use, duplication, modification or disclosure of the information to a third-party by any means without prior consent of SECO S.r.l. is prohibited.
Every effort has been made to ensure the accuracy of this manual. However, SECO S.r.l. accepts no responsibility for any inaccuracies, errors or omissions herein.
SECO S.r.l. reserves the right to change precise specifications without prior notice to supply the best product possible.
For further information on this module or other SECO products, but also to get the required assistance for any and possible issues, please contact us using the
dedicated web form available at
http://www.seco.com (registration required).
Our team is ready to assist you.
Revision Date Note Rif
1.0 16
th
November 2012 First Release SB
1.1 7
th
May 2013
Introduction and Technical features revised; Block Diagram updated
Power consumption added; Qseven
®
golden finger pinout updated
SB
2.0 30
th
September 2013 New manual release SB
2.1 22
nd
November 2013
Minor corrections; Technical features updated: number of independent displays and LVDS max resolutions
updated; Supported Operating Systems added. Limitation about PCI express support added. Pull-up
resistors indicated on signals UART0_RX and UART0_CTS#.
Corrected pull-up to pull-down on WDOUT signal description
SB
2.2 14
th
January 2014 LVDS resolution combinations corrected (par. 3.2.3.8) SB
2.3 6
th
May 2014
μ
SD card slot warning added (par 3.2.2); LVDS resolution combinations corrected (par. 3.2.3.8); SUS_S4#
signal name changed to SUS_S5#
SDIO_PWR Signal added in Qseven golden card edge connector
’
s pinout
Minor corrections about signal names in paragraph 3.2.3.15
SB
2.4 10
th
July 2014 Added I2C table in par. 3.2.3.14 SB
2.5 30
th
July 2014 Heatspreader and heatsink description updated in par. 4.1 SB
2.6 29
th
May 2015 Qseven
®
connector
’
s pins 125, 127 description corrected SB
2.7 29
th
October 2015
UART0_RTS# and UART0_CTS# signals removed from Qseven
®
connector
’
s pins 172, 178. Paragraph
3.2.3.2 updated consequently
SB
3.0 26
th
January 2016 Product Name change SB
REVISION HISTORY