background image

 

 

 

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant. 

 

Manual 

 

ST-BT02Q

 

6-in-1  

12VDC Battery Tester with Continuity 

Continuity 

 Voltage 

 Polarity 

 Load 

 Voltage Drop 

 PTC Fuse 

6-in-1 Tester 

Performs the following tests: 

The  ENFORCER 

ST-BT02Q 

12VDC  6-in-1  Battery  Tester  with  Continuity

 

is  a  compact  unit  that 

performs six essential troubleshooting tests in the field, including continuity testing. Four individually lit 
LEDs show the strength of the voltage present from excellent to poor, two separate LEDs show the 
progress of the test, and  one LED shows continuity during continuity testing. The illuminated pigtail 
connector  shows  AC,  DC,  and  polarity,  while  included  alligator  clips  allow  easy  connection  in  
any situation.

 

 

 

 

 

 

 

 

 

Voltage 

AC

 

 

Содержание ENFORCER ST-BT02Q

Страница 1: ...12VDC 6 in 1 Battery Tester with Continuity is a compact unit that performs six essential troubleshooting tests in the field including continuity testing Four individually lit LEDs show the strength of the voltage present from excellent to poor two separate LEDs show the progress of the test and one LED shows continuity during continuity testing The illuminated pigtail connector shows AC DC and po...

Страница 2: ...ing hook Included lead with alligator clips Load Test button Specifications Operating voltage 12VDC Maximum load 0 5 1 A switch selectable Power Continuity test 3VDC CR1220 type battery All other tests Passive no power required Weight 1 4 oz 40g Dimensions 2 X 13 4 X 11 8 51 X 44 X 29 mm Blue Excellent Green Good Yellow Weak Red Bad Red Input 3 15 6VDC Blue Input 21VDC Tester Status Indicators Red...

Страница 3: ...olarity Test 12VDC Only 1 Connect the test leads to the wires or terminals being tested 2 Connect the tester s 2 1mm DC illuminated jack directly to the 2 1mm DC plug of any 12VDC power source 3 The illuminated connector will show the polarity of the power present Intensity of the LED is proportional to the voltage DC Jack LED Color Polarity No color No voltage present Red Incorrect polarity Blue ...

Страница 4: ...continual development and improvement For this reason SECO LARM reserves the right to change specifications without notice SECO LARM is also not responsible for misprints or typographical errors Copyright 2010 SECO LARM U S A Inc All rights reserved This material may not be reproduced or copied in whole or in part without the written permission of SECO LARM SECO LARM U S A Inc 16842 Millikan Avenu...

Отзывы: