SECO-LARM ENFORCER SD-7098-SKDQ Скачать руководство пользователя страница 1

Страница: 1 / 4

SD-7098-SKDQ

Elbow RTE Push Plate

Manual

Features:



Oversized plate for increased visibility and
ease of use even when hands are not free



Low-profile design – only

" (22mm) thick



Dual-colored LED Indicates status
(red – standby, green – triggered)



Outputs rated 1A@30VDC, 0.5A@125VAC



Operating life: Over 100,000 cycles
(factory tested)



Operating voltage – 12/24VDC



2 Faceplates included



Momentary SPDT switch



Flexible mounting (surface, single-gang
back box, or European back box) allows for
quick and easy installation



Use with SECO-LARM maglocks for an
easily installed, high-security system

Содержание ENFORCER SD-7098-SKDQ

Страница 1: ...d LED Indicates status red standby green triggered Outputs rated 1A 30VDC 0 5A 125VAC Operating life Over 100 000 cycles factory tested Operating voltage 12 24VDC 2 Faceplates included Momentary SPDT...

Страница 2: ...x Manual Operating voltage 12 24VDC Current draw Standby 24mA 12VDC 25mA 24VDC Active 45mA 12VDC 47mA 24VDC Contact rating Output 1 1A 30VDC 0 5A 125VAC Output 2 1A 30VDC 0 5A 125VAC Switch type Momen...

Страница 3: ...rom the base Fig 4 6 For mounting to a back box use a small screwdriver to remove the circuit board from the base to expose the screw mount holes Fig 4 also Overview pg 2 Additional holes are provided...

Страница 4: ...obligation is limited to the repair or replacement of any defective part if the unit is returned transportation prepaid to SECO LARM This Warranty is void if damage is caused by or attributed to acts...