ENFORCER Composite Video Balun
4
SECO-LARM U.S.A., Inc.
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2009 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc
.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: sales
@
seco-larm.com
Mi-MVE-PB0x0Q.docx
Specifications:
Troubleshooting:
MVE-PB010Q MVE-PB020Q
Video
Max. range
2,230’ (680m)
Video format
YPbPr or RGB (1080p/1080i/720p/720i/480p/480i)
Maximum input
1Vpp
Insertion loss
Max. 2dB per pair over the freq. range from DC to 8MHz
Return loss
Max. 2dB per pair over the freq. range from DC to 15MHz
Common mode rejection
Greater than 40dB at 8MHz
Bandwidth
DC to 8MHz
Power
No power required
Connections
Wire type
UTP (unshielded twisted pair)
Wire category
20 - 24 AWG @ screwless terminal blocks
CAT5e or CAT6 for improved range
Connectors
Input
RCA male
RCA female
Output Terminal
block
RJ-45
Attenuation
DC ~ 5 Mhz, 1.5 dB max
Other
Dimensions 2
1
/
4
” x
5
/
8
” x
9
/
16
” (57 x 16 x 14 mm)
2” x
7
/
8
” x
3
/
4
” (51 x 22 x 19 mm)
Humidity range
0 ~ 95%
Temperature Range
14
°
~165
°
F (-10
°
~74
°
C)
Case
PC plastic
Composite video balun does not function
correctly
y
Make sure all input and output connections are
connected firmly to the balun
y
Make sure the video input device is turned on
y
Make sure the video output device is turned on
y
Test the Cat5e/6 cable between the baluns
y
Make sure the RJ-45 connector is wired according to
T568B wiring standards
PITLW2
PITSW4
Also Available from
SECO-LARM
:
HDMI over Cat5e/6
y
Component Video over Cat5e/6
y
Digital and Analog audio over Cat5e/6
MANUAL
MVE-PB010Q
Passive Composite Video Baluns
The ENFORCER Composite Video Baluns are the quick, low-cost way to connect composite or
component (YPbPr) video devices at greater distances than traditional video cabling methods. The
video baluns work in pairs to allow video signals to be transmitted up to 2,230’ (680m) over
low-cost Cat5e/6 unshielded twisted pair (UTP) cable instead of costly composite video cable.
•
Passive operation – No external power
required
•
Uses low-cost Cat5e/6 cable instead of costly
composite video cables
•
Small size for easy installation behind most
video devices
•
High immunity from interference – Built-in
impedance coupled device and noise filter
•
Gold-plated connector for longer life and better
reliability
•
Limited lifetime warranty
NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products.
MVE-PB020Q
(standard)
(snap-in)
