ENFORCER One- and Two-Channel 917MHz RF Receivers
4
SECO-LARM U.S.A., Inc.
Sample Applications:
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for
one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any
defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed
to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or
if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects
in material and workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the
replacement or repair only, at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or
consequential personal or property damage of any kind to the purchaser or anyone else.
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right
to change specifications without notice. SECO LARM is also not responsible for misprints. All trademarks are the property of
SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2020 SECO-LARM U.S.A., Inc. All rights reserved.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
®
PITSW1
762-151%
MI_HL-951xx-SQ_201029.docx
Typical N.C. Application
Typical N.O. Application
FCC COMPLIANCE STATEMENT
FCC ID: K4E951T4
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is
permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s
authority to operate the device.
Model
HL-951R1-SQ
HL-951R2-SQ
Operating frequency
917MHz*
Memory capacity
99 transmitter button codes per channel
Operating voltage
10~24 VAC, 9~48 VDC
Operating
current
Standby
7mA@12VDC / 5mA@24VDC (typical)
Active
50mA@12VDC / 25mA@24VDC per channel
Relay
Output
Type
Independent, sequence, access control
Modes
1~99 sec momentary (default, 1s), 1~99 min momentary, toggle, latch, follow (validity)
Relay
contacts
Number
1
2
Rating
Form C 10A@14VDC
Digital Display
2-Digit, 7-segment LED
Connectors
Screw terminals, +, -, with NO/NC/COM per relay
Operating temperature
-40°~167° F (-40°~75° C)
Dimensions
3
15
/
16
"x2
1
/
2
"x1
3
/
16
" (100x63x30 mm)
*
868.35MHz versions also available
Specifications:
Forward/Reverse, 2 Relays
COM2
NC2
NO2
Power
GRD
–
+
Power
12VDC
Ch. 1
Electric Door Strike
Ch. 2
COM1
NC1
NO1
COM2
NC2
NO2
Power
GRD
–
+
Power
12VDC
Ch. 1
Ch. 2
Electromagnetic Lock
COM1
NC1
NO1
COM2
NC2
NO2
Power
GRD
–
+
Power
12VDC
Ch. 1
Ch. 2
Motor
+
–
COM1
NO1
NC1
