ENFORCER Type 4-in-1 HD TVI, CVI, AHD, Analog Covert PIR Camera
SECO-LARM U.S.A., Inc.
7
Video Output:
This function is used to change the Video Output and Video Standards.
1. Select VIDEO OUTPUT on the Main Menu screen.
2. Select the desired operation by moving the joystick to
the left or right and pressing enter.
HD:TVI (Default)
: 5MP@20FPS, [email protected], 4MP@25FPS, 4MP@30FPS, 4MP@15FPS,
1080P@25FPS, 1080P@30FPS
CVBS
: NTSC, PAL
AHD
: 5MP@20FPS, [email protected], 4MP@25FPS, 4MP@30FPS, 4MP@15FPS,
1080P@25FPS, 1080P@30FPS
CVI
: 4MP@25FPS, 4MP@30FPS, 4MP@15FPS, 1080P@25FPS, 1080P@30FPS
‐
RETURN:
Return to the MAIN MENU screen.
Exit:
This function is used to apply all OSD changes and exit the menu screen, reset all values to their
factory defaults, or exit the menu screen without saving any changes.
1.
Select EXIT on the Main Menu screen.
2.
Select the desired operation by moving the joystick to the left or right and pressing enter.
-
SAVE & END
: Save all OSD changes and exit the OSD menu.
-
RESET
: Restore all OSD settings to factory defaults and exit the OSD menu.
-
NOT SAVE
: Exit the OSD menu without saving any change
‐
MIRROR:
Adjust the camera’s mirror settings to change the
viewing orientation of the camera.
o
H: Flip the video orientation horizontally.
o
V: Flip the video orientation vertically.
o
HV: Flip the video orientation horizontally and vertically.
‐
D-WDR:
Adjust the camera’s digital wide dynamic
range (D-WDR) settings to provide clear images
even under intense back light conditions.
o
OFF: Turn D-WDR off (Default OFF).
o
ON: Turn D-WDR on.
‐
RETURN:
Return to the MAIN MENU screen
D-WDR OFF
D-WDR OFF
