ENFORCER 4-in-1 HD Cameras (TVI, CVI, AHD, Analog)
8
SECO-LARM U.S.A., Inc.
Video Output:
Exit:
IMPORTANT:
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws
and statutes related to monitoring and recording audio and video signals. SECO-LARM
will not be held responsible for the use of this
product in violation of any current laws or statutes.
®
PICRN3
MI_EV-Yxxx1-AxxQ_OSD_191206.docx
This function is used to save all OSD changes and exit the menu screen, reset all values to their factory
defaults, or exit the menu screen without saving any changes.
1.
Select EXIT on the Main Menu screen.
2.
Select the desired operation by moving the joystick to the left or right and pressing enter.
‐
RESET
: Restore all OSD settings to factory defaults and exit the OSD menu.
‐
SAVE & END
: Save all OSD changes and exit the OSD menu.
‐
EXIT
: Exit the OSD menu without saving any changes.
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own
expense.
‐
LANGUAGE
: Set the desired OSD menu language. Select from English, Chinese1 (Simplified), Chinese2
(Traditional), Italian, Russian, Portuguese, Japanese*, Polish*, French*, Korean*, Greek*.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to
change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of
SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2020 SECO-LARM U.S.A., Inc. All rights reserved.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for three
(3) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part
if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God,
physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other
reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and
workmanship. The sole obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or property
damage of any kind to the purchaser or anyone else.
This function is used to change the Video Output and Video Standards.
1.
Select VIDEO OUTPUT on the Main Menu screen.
2.
Select the desired operation by moving the joystick to the left or right and pressing enter.
HD:
TVI
: 5MP 20FPS. 1080p / 25/30 FPS*
CVBS
: NTSC, PAL
AHD
: 5MP 20FPS. 1080p / 25/30 FPS*
CVI
: 4MP 25/30FPS. 1080p / 25/30 FPS*
‐
RETURN:
Return to the MAIN MENU screen
*Settings for EV-Y2251 series only
