ENFORCER IP Fixed Cameras
2
SECO-LARM U.S.A., Inc.
Accessing the IP Camera Interface:
Table of Contents:
Programmable Features:
Programmable Features…………………………………………………... 2
Accessing the IP Camera Interface……………………………………….2
Device Search……………………………………………………………… 3~4
Connect to Camera………………………………………………………… 4~5
Login Screen………………………………………………………………...5
Live…………………………………………………………………………... 6
Color Adjustments:………………………………………………………….7
Playback…………………………………………………………………….. 7
Remote Setting – Channel ………………………………………………8~11
Remote Setting – Record ……………………………………………….12~13
Remote Setting – Alarm………………………………………………….13
Remote Setting – Network…………………………………………….…14~19
Remote Setting – Device………………………………………..............20
Remote Setting – System………………………………………………...21~28
Local Setting……………………………………………………………….28
Troubleshooting/Warranty………………………………………………..29
Exposure
Adjust the shutter speed, automatic gain control (AGC), and
defog settings
Digital Wide Dynamic Range (D-WDR)
Provide clear images even under circumstances where backlight
illumination can vary
Back Light Compensation (BLC)
Adjust the exposure to properly display the subject in front of
bright light sources
White Balance
Adjust the color temperature/image color
Day & Night
Adjust the level of ambient light that triggers the camera to
switch between color and B/W modes
Digital Noise Reduction (DNR)
Adjust for less interference on the screen in an area with low
illumination
NOTE:
All screen images in this manual are simulated.
D-WDR OFF
D-WDR ON
BLC OFF
BLC ON
DNR ON
Install
Device Config Tool
using included CD:
Select your software:
For Mac Installation:
CDROM\software for Mac\Device Search\
For PC Installation
:
CDROM\software for PC (except MAC)
1.
Click next
2.
Choose install location, click next
3.
Review your settings and click Install
4.
Click Finish (Click the checkbox to the Launch
Device Config Tool
.)
DNR OFF
