Secced SC-402-6, Инструкция по эксплуатации

Страница: 7 / 17

B
F
A
D
C G
E
Figure 11-2
Figure 11-1
A. Locking lever for tilt motor E. Locking lever for camera plate
B. Tilt gear F. Camera adaptor
C. Screws G. Tilt motor
D. Camera plate
Figure 11-3
Secced SC-3950 Camera adaptor
Figure 12
Iris motor
Iris gear
Focus motor
Focus gear
Motor frame
As shown in figure 12, install the focus and iris control (lens control motor) on the lens.
7
There are two focus gears available, one is for Canon lens, and another is for Fujinon lens. Select
the gear matching with the lens used and install it on the motor frame. Turn clockwise the
focus-adjusting wheel on the lens to the end, and turn anticlockwise the motor gear to the end.
Engage the two gears and tighten the knob of motor fastening. The IRIS motor can be installed by
the same method.