5
4
Operation
•
Connect the heat press to a 230 V power socket using the connection cable
supplied.
•
Switch on the press with the red rocker switch.
•
After switching on the press heats up automatically to the set temperature,
which can be changed at any time on the temperature control knob. A small
light on the temperature control knob illuminates as long as the press is
heating up.
•
You can adjust the contact pressure by turning the large threaded ring below
the pressing plate up (to increase the pressure) or down (to reduce the
pressure). After adjusting the pressure it is necessary to arrest the lower
pressing plate with the Allen screw located on the end below the threaded
ring on the base of the press.
•
As soon as the press is heated up completely you can stating making the first
transfers. For this purpose select the desired pressing time on the time control
knob. The timer starts running as soon as the press is closed with the press
lever. After expiration of the set time a warning signal sounds.
Temperature control knob
Time control knob
Note
Note
Note
Note:
:
:
: When the press is closed without textile in it, a vacuum develops which
When the press is closed without textile in it, a vacuum develops which
When the press is closed without textile in it, a vacuum develops which
When the press is closed without textile in it, a vacuum develops which
can lead to a loud noise when the upper plate is raised when opening the press.
can lead to a loud noise when the upper plate is raised when opening the press.
can lead to a loud noise when the upper plate is raised when opening the press.
can lead to a loud noise when the upper plate is raised when opening the press.
Note
Note
Note
Note:
:
:
: A
A
A
Actuate the press lever only when the press has been
ctuate the press lever only when the press has been
ctuate the press lever only when the press has been
ctuate the press lever only when the press has been swivelled
swivelled
swivelled
swivelled in
in
in
in
completely; i.e. the upper and lower pressing plates are directly above one
completely; i.e. the upper and lower pressing plates are directly above one
completely; i.e. the upper and lower pressing plates are directly above one
completely; i.e. the upper and lower pressing plates are directly above one
another.
another.
another.
another.
Note
Note
Note
Note:::: The heat press has to cool down after use, which can take some time.
The heat press has to cool down after use, which can take some time.
The heat press has to cool down after use, which can take some time.
The heat press has to cool down after use, which can take some time.
