background image

Declaration   of   conformity   -   Statement   of   Conformity  

 
We   hereby   declare   under   our   sole   responsibility   that   the   product   referred  
to   in   "technical   data"   complies   with   the   provisions   of   the   following  
directives   and   standards:  
 
We   herewith   declare   under   sole   responsibility   that   the   under   „technical  
data“   mentioned   product   meet   the   provisions   of   the   following   EC  
Directives   and   Harmonized   Standards:  
 
●   EG-Richtlinien    /    EC    Directives:  

●   2014/35   /   FG   Establishment   Directive  

●   2014/35/EC   Low   Voltage   Directive  

●   98/37/EC   Directive   on   machinery   (2006/42/EC   from   12/29/2009)  

●   98/37/EC   Directive   on   machinery   (from   2009-12-29:   2006/42/EC)  

 

●   Norm    /    Standard:    EN    60204-1:2006  

Technische    Dokumente    bei    /    Technical    documents    at:   

Secabo    GmbH,    Hochstatt    6-8,    85283    Wolnzach,    Germany  

 
 
 
 
 
Dipl.   Ing.   Fabian   Franke  

 

 
 
 
 
Dipl.   Ing.(FH)   Bernhard   Schmidt  
 
 
 

 
 
 
 
 
 

 

Secabo   GmbH     Hochstatt   6-8     85283   Wolnzach     Alemania     [email protected]     www.secabo.com  

Содержание TC1








Отзывы: