Safety Precautions
Please read the information and safety precautions carefully prior to first commissioning of the
device!
● Do not place any magnetic objects in the vicinity of the cutting head; otherwise a uniform
contact pressure is not ensured.
● Do not remove the connection cable to the computer while plotting is in progress.
● Do not reach into the unit when it is connected to an electric supply.
● Never open the casing and do not make any modifications to the unit yourself.
● Ensure that neither liquids nor metal objects are put inside the flatbed vinyl cutter.
● Ensure that the wall socket used is grounded and protected with a ground fault switch.
● Ensure that the connected voltage (230V) does not deviate by more than ±10%. Otherwise,
a voltage stabilizer needs to be used.
● Pull the power plug if the unit will not be in use for a longer period of time.
● Never reach into the unit in the vicinity of the blade holder during the cutting operation!
● Discontinue any printing jobs in progress before readjusting the blade holder!
● Always ensure that the flatbed vinyl cutter is out of reach of children during operation and
never leave the unit or individual parts of it switched on without supervision.
● Do not touch the tip of the sliding blade as to avoid injury.
● Always place the unit on a stable base to prevent it from falling down.
● Do not operate the unit during thunderstorms; it can be damaged or destroyed by lightning.
Secabo GmbH | Hochstatt 6-8 | 85283 Wolnzach | Germany | [email protected] | www.secabo.com
2
