Secabo 109.510.200, Инструкция по эксплуатации

Страница: 2 / 15

Precautions
Please read these instructions and precautions carefully before operating the cross laser system
for the first time and keep them in a safe place! Please observe the following operating and safety
instructions so that you can enjoy your modular Secabo cross laser system for a long time.
● Do not make any changes to the cross laser system yourself.
● Make sure that the cross laser system does not come into contact with liquids.
● Make sure that the outlet used is grounded. Please note that the cross laser system may
only be operated from an outlet that is protected by an RCD circuit breaker.
● Only use the power adapter included in the scope of delivery.
● Disconnect the cross laser system from the power supply when not in use.
● Always operate the cross laser system out of the reach of children and never leave the
switched-on cross laser system unattended.
● Make sure that the cross laser system is only used in dry rooms.
● Do not assemble and adjust the cross laser system while the heat press is switched on and
while it is hot. CAUTION: Danger of burns!
● Removing the safety-relevant warning signs is not permitted!
Operating and safety instructions for the operation of cross lasers for heat presses (laser
class 2)
The cross lasers for heat presses correspond to a class 2 laser (according to DIN EN
60825-1:2014)
Nepata Vertrieb GmbH | Hochstatt 6-8 | 85283 Wolnzach | Germany | mail@secabo.com | www.secabo.com
2